聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
業內資訊
雕刻機斷刀的原因及解決方法
來源：http://www.chnzm.cn 時間：2022-04-12
雕刻機在使用過程中，難免出現斷刀的現象，主要是因為雕刻刀具不足以承受當前的切削力。也有可能是因為操作人員操作不當導致。下面總結一下導致雕刻機斷刀的各種原因，希望對各位雕刻機用戶有幫助。
In the process of using the engraving machine, it is inevitable to break the tool, mainly because the engraving tool is not enough to bear the current cutting force. It may also be caused by improper operation of operators. The following is a summary of the various reasons for the cutter breakage of the engraving machine, hoping to be helpful to all engraving machine users.
1、是雕刻加工的材料問題，如果被加工的材料本身硬度不均勻、雜質較多等都會引起斷刀。
1. It is the material problem of engraving processing. If the hardness of the processed material itself is uneven and there are many impurities, it will cause knife breakage.
2、是雕刻機所連接的電壓問題，如果電源電壓不穩定，也會引起刀具的斷損。
2. It is the voltage problem connected to the engraving machine. If the power supply voltage is unstable, it will also cause the cutting tool to break.
3、所選用刀具的硬度、強度、鋒利程度以及刀桿的長度有關，要根據所加工材料的不同選用合適的刀具。
3. The hardness, strength and sharpness of the selected cutting tools are related to the length of the tool bar. Appropriate cutting tools should be selected according to the different processing materials.
4、雕刻材料固定不好、刀具裝夾不牢固、刀桿和主軸不同心的情況下會因為主軸高速旋轉刀具晃動，引起斷刀。
4. When the engraving material is not fixed well, the tool clamping is not firm, and the tool rod and the spindle are not concentric, the tool will be broken due to the high-speed rotation of the spindle and the shaking of the tool.
5、雕刻機雕刻是對雕刻指令的執行，包括位置指令和速度指令，加工程序的正確與否也會對刀具有影響。
5. Engraving machine engraving is the execution of engraving instructions, including position instructions and speed instructions. Whether the processing program is correct or not will also have an impact on the knife.
6、雕刻機床的啟動速度不要設置過高，啟動速度也高越容易引起機床震動，也容易導致斷刀。
6. The starting speed of the engraving machine tool should not be set too high. The higher the starting speed is, the more likely it is to cause vibration of the machine tool and tool breakage.
7、雕刻機主軸的轉速高低影響，雕刻同樣的產品，主軸轉速過低的情況下，刀具切削力變大，而主軸扭力不變就會引起斷刀，所以使用的主軸轉速還是要偏高一些。
7. The rotation speed of the main shaft of the engraving machine affects the engraving of the same product. When the rotation speed of the main shaft is too low, the cutting force of the tool becomes larger, and the constant torsion of the main shaft will cause tool breakage. Therefore, the rotation speed of the main shaft used is still higher.
8、單次下刀的程度設定，吃刀量過小，加工時間變長；吃刀量過大，刀具承受不了也會斷刀。
8. The degree of single cutting is set, the cutting amount is too small, and the processing time becomes longer; If you eat too much, the knife will break if it can't bear it.
9、機床的加工范圍和使用刀具是否符合所加工材料？雕刻機床與地面是否平穩也可能引起斷刀。
9. Is the machining range and tool of the machine tool consistent with the processed materials? Whether the engraving machine tool is stable with the ground may also cause knife breakage.
10、在雕刻硬質材料例如大理石、花崗巖、玻璃以及金屬材料的時候，是否有使用專用潤滑劑潤滑。
10. Whether special lubricants are used when carving hard materials such as marble, granite, glass and metal materials.
11、雕刻軟性金屬材料例如銅鋁或者其他熔點較低的材料例如塑料材質的時候刀具排屑不暢也是引起斷刀的原因之一。
11. When carving soft metal materials such as copper and aluminum or other materials with low melting point such as plastic, poor chip removal of the tool is also one of the reasons for tool breakage.
以上原因大體涵蓋了雕刻機斷刀的原因，如果排除了以上情況，仍然出現斷刀現象，建議聯系雕刻機生產廠家或者經銷商實地排查。
The above reasons generally cover the reasons for the knife breaking of the engraving machine. If the above conditions are excluded and the knife breaking still occurs, it is recommended to contact the manufacturer or dealer of the engraving machine for on-site investigation.
以上就是為大家介紹的有關玉石雕刻機的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.chnzm.cn/
The above is the detailed introduction of jade carving machine. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.chnzm.cn/
- 上一篇：石材雕刻機在使用過程為什么要加水？
- 下一篇：泡沫雕刻機日常井蓋如何進行維修保養？
